The FCC Made Foreign-Made Robots Hard to Buy. What It Means If You Run a Warehouse
On July 28 the FCC put foreign-produced advanced robotic devices on the Covered List. On October 28 a Section 232 proclamation found a national-security risk but did not add new tariffs. Here is a plain-English read of the public documents.
TL;DR: On July 28 the FCC added foreign-produced “advanced robotic devices” — mobile robots such as humanoids and quadrupeds — to its Covered List. For new models, that blocks the equipment authorization needed to import, market, or sell them in the US. On October 28 a presidential proclamation found that imports of robotics and industrial machinery threaten national security, but it directed negotiations rather than new tariffs. If you run a warehouse, the first question is which machines are actually covered.
Two different tools moved in four months. One is a communications-equipment list that can keep a new robot model out of the US market. The other is a trade investigation that has so far produced talks, not a new duty. They get talked about together. They do not do the same thing.
I run consumer brands that are manufactured in China, so I already think about what can and can’t move across that supply chain. This is a plain-English read of the public documents, not legal advice. If you are about to sign a purchase order, get counsel.
What the FCC did on July 28
The FCC’s fact sheet is the primary source. On July 28, 2026, the Commission updated its Covered List to include two new categories: foreign-produced “advanced robotic devices,” defined there as mobile robots such as humanoids and quadrupeds, and, separately, connected power inverters produced in foreign countries (FCC fact sheet).
The update followed a determination by a White House-convened Executive Branch body that these foreign-made products, “regardless of the nationality of origin,” “pose unacceptable risks to the national security of the United States or the safety and security of United States persons.” The agencies cited supply-chain vulnerabilities and a cybersecurity risk to critical infrastructure (FCC fact sheet).
Three limits in that same fact sheet matter as much as the headline.
The restrictions apply to new device models. They do not stop someone from continuing to use a device they already bought. They do not prevent retailers from continuing to sell, import, or market models that were already authorized through the FCC’s equipment-authorization process. And they do not affect purchase or use by the federal government (FCC fact sheet).
There is also an exemption path. Producers can apply for “Conditional Approval” if the Department of War finds that a device or class of devices does not pose those risks. For inverters, the Department of Homeland Security can also grant that approval (FCC fact sheet).
What “advanced robotic device” actually means
The title of this piece says “foreign-made robots.” The legal hook is broader and narrower than a China-only rule, and the difference is the whole operator problem.
It is broader because the Covered List entry is for foreign-produced devices, not a China-only statute. The fact sheet says the determination applies regardless of nationality of origin (FCC fact sheet).
It is narrower because not every robot is an “advanced robotic device.”
A September 22 note from the law firm O’Melveny, walking through the underlying determination, describes a mobile device — including autonomous mobile robots, humanoids, and quadrupeds — that can locomote, operate at a distance, weighs more than 4.4 pounds, and combines sensors with a network connection of at least 200 kbps and software. The same note says the definition excludes connected vehicles, certain surgical instruments, and non-mobile robots, including fixed-arm industrial and medical robots (O’Melveny).
If that read is right, a classic bolted-down warehouse arm and a walking humanoid are not in the same bucket. A lot of commentary blurs them. The documents do not.
O’Melveny also flags a sourcing test that warehouse buyers should not skip. “Foreign-produced,” in its read of the rules, can include a robot assembled in the US if it fails a Buy American-style domestic-component threshold: 65% now, rising to 75% in 2029. Labor does not count toward that test, and foreign components cannot exceed 35% of the bill of materials. On the face of the rules, the restriction is not limited to one country; in practice, China is where most of these mobile robots are made (O’Melveny).
The same note says some specific models had already been named as exempted under Conditional Approval. I am not going to turn this into a product list. If you have a vendor saying their machine is clear, ask them to show you the exemption, not a slide.
O’Melveny’s note is dated September 22. It was written while a Section 232 investigation, announced in September 2025, was still pending. It should not be read as knowing what happened on October 28.
What October 28 did — and did not do
On October 28 the President issued a proclamation on imports of robotics, industrial machinery, and their parts and components. It is the primary source for the Section 232 outcome (White House proclamation).
The Department of Commerce had found that those imports threaten to impair national security. The President concurred. The proclamation directs the Secretary and the Trade Representative to negotiate and to update within 180 days. It says the President “may consider alternative remedies in the future, including imposing or modifying tariffs, duties, quotas, and fees” (White House proclamation).
What it does not do is impose any of those remedies in the proclamation itself. There is no new tariff, quota, or fee in that document. The finding is real. The duty is not, yet.
The proclamation also puts some scale on the industrial base it is worried about: $7.1 trillion in US manufactured-goods shipments in 2024, and $86 billion of the relevant equipment, with the US relying on foreign imports for most types (White House proclamation).
Next-day trade press read it the same way I do: talks first, tariffs later if talks fail (Supply Chain Dive). I am using that only as a next-day confirmation of the proclamation, not as a source for the legal facts.
So what if you run a warehouse
- If you are looking at a new humanoid, quadruped, or autonomous mobile robot, the FCC action is the near-term gate. Ask whether that exact model is already authorized, whether it is on the Covered List, or whether it has Conditional Approval. “We have a Chinese supplier” and “we assemble in the US” are not, on their own, answers.
- If your floor is mostly fixed-arm industrial robots, do not assume the July 28 Covered List entry covers them. The fact sheet is about mobile advanced robotic devices. O’Melveny’s read of the definition carves out non-mobile, fixed-arm machines. Confirm that with counsel against the actual model, not against a headline.
- If you already own the machines, the fact sheet says continued use of previously acquired devices is unaffected, and previously authorized models can still be sold, imported, and marketed. A new model is a different problem. A spare-parts and successor-model plan is now part of the buying decision.
- If you are watching trade policy for a price shock, October 28 is a watch item, not a new duty. Negotiations are supposed to be updated within 180 days, and tariffs remain on the table as a later option. Do not budget a new Section 232 rate that the proclamation did not set.
What would change my mind: a later action that either imposes the tariffs the proclamation only reserved, or a Conditional Approval process that, in practice, lets a wide set of new foreign-produced mobile robots back into the market. Neither had happened as of this writing.
Open question for readers: if you run a warehouse, are you delaying a humanoid or AMR purchase until the authorization path is clearer — or are you treating this as a problem only for new models you don’t own yet?
Disclosure: I hold no positions in any company mentioned. No company reviewed this piece. My own consumer brands are manufactured in China. This is not legal advice.
Sources & notes
- Federal Communications Commission, Fact Sheet, “FCC Updates Covered List to Include Foreign-Produced Advanced Robotic Devices and Power Inverters,” July 28, 2026: https://docs.fcc.gov/public/attachments/DOC-423682A1.pdf
- O’Melveny, “New Restrictions Seek to Exclude Chinese Robotics from U.S. Market,” September 22, 2026. Used for the more detailed definition, the domestic-component test, and the fact that some models had been named as exempted. Dated before the October 28 proclamation: https://www.omm.com/insights/alerts-publications/new-restrictions-seek-to-exclude-chinese-robotics-from-us-market/
- The White House, Proclamation on Adjusting Imports of Robotics, Industrial Machinery, and Their Parts and Components into the United States, October 28, 2026: https://www.whitehouse.gov/presidential-actions/2026/10/adjusting-imports-of-robotics-industrial-machinery-and-their-parts-and-components-into-the-united-states/
- Supply Chain Dive, “Trump opts for trade talks over tariffs for robotics, industrial machinery,” October 29, 2026. Next-day trade-press read of the proclamation; not used as a source for the legal facts: https://www.supplychaindive.com/news/trump-opts-for-trade-talks-over-tariffs-for-robotics-industrial-machinery/873166/